No.1 SINGLE CASK. CaskWidge Kit 9-11gal - Single Beerline Outlet


Add to Cart:


  • Model: KITRL


Single Cask Kits are recommended for those wishing to dispense one cask at a time from a vertical 9-11gal cask (firkin). Ideal for low turnover establishments, home brewers, outdoor events, portable bars and parties.

Single kits contain everything you will need to tap, vent and connect your beerline to extract from a vertical standing cask ready to serve. All kits contain a single beerline connector (Red 'L' Piece).

For those wishing to convert their Single Kit to facilitate running two beerlines from one cask, you will need an additional double beerline connector (Red 'T' Piece) and Grey Pipe Connector. These are available from the optional extras below or on the Accessories Page.

Alternatively, to have one cask serving beer and a second cask conditioning, ready for the change over when the first cask is empty, with two beerlines running to one cask, we would recommend a Dual Kit with a Double Beerline Outlet instead. The Float Tube measures 57.5cm for an 9-11g cask size. The connectors all have a 3/4 BSP Thread. The beer is drawn in through the filter mesh in the Float Head.

NOTE: Remove all old fittings from the end of your beerlines, before installing your CaskWidge System using the connectors and hose clips provided for an airtght fit. Make sure the pipe connectors and shut off caps contain washers at all times. Spare washers can be purchased as additional from additional options below or from the Accessories Page.

NOTE: Dependent on the level of usage, the O'Rings on the Red 'L' Piece, Red 'T' Piece and Tapping Cap may need replacing annually to maintain an airtight fit. Spare O'Rings can be purchased as additional from additional options below or on the Accessories page.