No.5 DUAL CASK. Caskwidge Kit 18-22gal - Single Beerline Outlet


Add to Cart:


  • Model: KITBDL


Dual Cask Kits are recommended for those wishing to dispense from one cask attached to one beer pump from a vertical 18-22gal cask (kilderkin) and a second cask conditioning ready for when the first cask is empty. Ideal for medium to high turnover establishments. The No5 Kit is the most popular option for new customers converting to The CaskWidge System, dispensing from 18gal casks.

This kit is highly recommended to all NEW customers. A Dual kit contains the minimum amount of equipment required for trialing the CaskWidge system on one 18-22gal Kilderkin sized cask, attached to one beer engine/handpump with a second cask waiting to go on line. .

This Dual Kit contain everything you will need to tap, vent and connect one beerline to extract from an 18-22 gallon cask ready to serve and also the parts needed to tap, vent and condition a second cask ready and waiting to go on-line, when the first cask is empty. All kits come with a single beerline connector (Red 'L' Piece).

For those wishing to run two beerlines from one cask, we would recommend kit No8. Dual Kit 18-22 gal double beerline outlet.

We would recommend:

• A Cleaning Kit - these 3 Brushes are specifically designed to fit into all components including inside the Float tube

• A Clarity Taste Sampler – allowing clarity and taste sample to be taken from cask.

 • A spare Black Float – to ease cask change over during service 
The FDA Approved Foodgrade Float Tube measures 75cm for a 18-22g cask size. The beer is pulled in through the fine mesh in the Float Head. The connectors all have a 3/4 BSP Thread.

NOTE:Remove all old fittings from the end of your beerlines, before installing your CaskWidge System using the connectors and hose clips provided for an airtight fit. Make sure the pipe connectors and shut off caps contain washers at all times. Spare washers can be purchased on the Accessories Page

NOTE: Dependent on the level of usage, the O'Rings on the Red 'L' Piece, Red 'T' Piece and Tapping Cap may need replacing annually to maintain an airtight fit. Spare O'Rings can be purchased on the Accessories page.